ON AIR LIGHT
Smart "On Air Light" used for signalling that a Recording, Podcast, Stream or Live session is in progress.
Fully automated, turned on and off via your software or hardware, generally positioned above the door way leading into a venue/space to indicate that you are "ON AIR" , avoiding interruptions, awkward situations or used as a tally light.
This Product is aimed to be used in a Recording Studio, Board Room, Radio Station, Podcast Studio, Live Streaming Venue, however there are other possible uses.
Installation Requirements:
Hardware or Software able to send specified MIDI Notes/OSC/Webhooks over network
Wifi (2.4GHZ) and network infrastructure
Power - 110v - 220v 50/60Hz outlet - cable & plug-top not supplied
Tools and basic DIY skills to mount light - mounting bracket and fasteners included
Tech Spec:
20 watt max
280mm x 125mm x 70mm
Shipping Weight 500g max
This "ON AIR" light is triggered via a MIDI, OSC, or Webhook message or command, any device or application able to send the correct command or message over a network will be able to control the device. MIDI notes can be modified on the Configuration Page.
Tested and working on the following:
Windows - Cubase, Studio One, Reaper, Ableton, OBS, Touch OSC, ProTools, RadioBoss, VMix, Restream
Linux - Reaper, OBS, Linux Show Player, Restream
MAC - GarageBand, Logic, Cubase, ProTools, Studio One, Ableton, Restream, Qlab
Not yet tested but meets the criteria (MIDI/OSC/Webhooks) or with Third-party App or Script:
Streamlabs, Twitch, Vimeo, Bitwig Studio, SCS - Show Cue System, QLC, ...
If you are interested but not sure on Compatibility please reach out to us so that we can confirm or get started on testing and creating a how to guide. Click the "REQUEST" button below.
If you have purchased an "ON AIR" Light and would like a how to guide. Click the INSTRUCTIONS/GUIDE button below
R2 950.00
SMART SWITCH
Expanding automation in the Entertainment Industry.
- Smart switch Automation via OSC, MIDI, ARTNET, Webhook
- Smart switch used for remote control of devices via onboard relays.
- Send commands/messages via OSC, MIDI, ARTNET or Webhook.
This Product is aimed to be used in the entertainment industry allowing control of external devices from hardware or software capable of sending the correct command/message over a WiFi network.
Lighting consoles, Lighting software, Digital mixing consoles, CUE software, Vision mixing software, Vision mixing Hardware ...
Propresenter, QLab, QLC, SCS, DAW's...
Example:
- Use your lighting Software or Console (ARTNET or OSC command) to open or close the Curtains in a theatre.
- Turn off the house lights from a lighting CUE
- Power up Amp racks, Stage Boxes/IO, wireless IEM or Microphone racks from FOH, can assist in ensuring correct booting sequences.
Installation Requirements:
Hardware or Software able to send specified MIDI Notes/OSC/ARTNET/Webhooks over network
Wifi (2.4GHZ) and network infrastructure
Power - 110v - 220v 50/60Hz outlet - cable & plug-top not supplied
Tested on the following:
Touch OSC, Linux show player, Qlab, SCS, QLC, Vmix, most DAW's, Midi controllers
Smart Switch 220v C1V1
1 x 220v Input and 1 x 220v Output
Relay 220v 10Amp 2200watt
voltage range 110 -250v
Dimensions 70mm x 40mm
R850.00
Locally Made & Inspired Products providing solutions in the Entertainment industry.
R200
R200
Hi Powered Pre Amp for hard wired IEM/Headphone monitoring.
- Rechargeable internal lithium battery. (18650 / 4200mAH) 6 hours at full Load Volume
- Locking XLR - Mono input
- mini jack 3.5mm Output
- Type USB Micro Charge port
- Charge indicator LED
- Large Belt Clip
- 3 Watt Amp (Great for Multi Driver IEM)